PFR=0, RE=0, TE=0, DM=0, ILB=0, RTM=0, PRM=0, TPC=0, MPDE=0, PRCEF=0, RXF=0, TXF=0, ZPF=0
ETHERC Mode Register
| PRM | Promiscuous Mode 0 (0): Disable promiscuous mode 1 (1): Enable promiscuous mode. |
| DM | Duplex Mode 0 (0): Half-duplex mode 1 (1): Full-duplex mode. |
| RTM | Bit Rate 0 (0): 10 Mbps 1 (1): 100 Mbps. |
| ILB | Internal Loopback Mode 0 (0): Perform normal data transmission or reception 1 (1): Loop data back in the ETHERC when full-duplex mode is selected. |
| TE | Transmission Enable 0 (0): Disable transmit function 1 (1): Enable transmit function. |
| RE | Reception Enable 0 (0): Disable receive function 1 (1): Enable receive function. |
| MPDE | Magic Packet Detection Enable 0 (0): Disable Magic Packet detection 1 (1): Enable Magic Packet detection. |
| PRCEF | CRC Error Frame Receive Mode 0 (0): Notify EDMAC of a CRC error 1 (1): Do not notify EDMAC of a CRC error. |
| TXF | Transmit Flow Control Operating Mode 0 (0): Disable automatic PAUSE frame transmission (PAUSE frame is not automatically transmitted) 1 (1): Enable automatic PAUSE frame transmission (PAUSE frame is automatically transmitted as required). |
| RXF | Receive Flow Control Operating Mode 0 (0): Disable PAUSE frame detection 1 (1): Enable PAUSE frame detection. |
| PFR | PAUSE Frame Receive Mode 0 (0): Do not transfer PAUSE frame to the EDMAC 1 (1): Transfer PAUSE frame to the EDMAC. |
| ZPF | 0 Time PAUSE Frame Enable 0 (0): Do not use PAUSE frames that containing a pause_time parameter of 0 1 (1): Use PAUSE frames that containing a pause_time parameter of 0. |
| TPC | PAUSE Frame Transmit 0 (0): Transmit PAUSE frame even during a PAUSE period 1 (1): Do not transmit PAUSE frame during a PAUSE period. |